50 meter workshop roll 50 m X 100cm (39inch x 39inch)
Fibreglass mosaic mounting mesh.
Suitable for all types of mosaic tile.
Very strong, safe to use
Easy to cut with craft knife or scissors. Mesh hole size 4mm
1/ Firstly put your design on the work bench. (Pin this out)
2/ On top of this put cling film. (Pin this out)
3/ On top of that put the mash. (Pin this out)
4/ Using a paintbrush, use waterproof PVA glue (available cheaply from any builders) paint it on to the mesh and stick your tiles face upwards on to the mesh.
5/ Once you design is complete and the PVA is dry you will be able to lift it up and or turn it over.
6/ peel the cling film from the back of your design.
7/ Put a thin 1.5mm flat layer of adhesive on the wall or where ever you design will be installed.
8/ You will be able to lift your design up in one piece and press the whole thing into the adhesive.
9/ If it is to large to move in one piece simply cut it up on the work bench with a sharp blade between the tiles in usable sizes and reassemble on the wall.
Once the adhesive has gone off grout in the normal way.